DEWATERING COMPANY is a nationwide full service contractor
for permanent or temporary construction and environmental dewatering.
Griffin provides safe and innovative solutions for groundwater
control systems. Griffin has the ability to evaluate, design,
fabricate, install and operate systems to control or remove
groundwater. GRIFFIN offers:
Staff providing cost effective and comprehensive
solutionscustomized for your project application.
Dewatering Deep Well Dewatering Eductor Well Dewatering Remediation Dewatering Suction Well Systems LFG Well Systems
Trenching Relief Wells Pollution Monitoring Wells Open Pumping Systems Flood Control Systems By-pass Pumping Systems
operation and maintenance services suited to your project include:
Services Water Treatment Services
Installations Grouting Installations
FLEET OF DEWATERING PUMPS AND EQUIPMENT
Strength of Griffin, Unsurpassed Products & Services.
Designed for high air-handling capacity of
50-219 cfm and maximum performance at a variety of flows and
head conditions in sizes from 4" to 10". Flows 500-3500
gpm. Vacuums to 30 Hg.
Swingjoints / Grommets / Header Systems Butterfly
swingjoints are designed with valves allowing for a fully
adjustable flow through the wellpoint and to provide a flexible
connection between the Griffin wellpoint and Speedfast®
header system. Header Grommets allow in-field installation
and operation or Griffin can provide a complete ready-to-install
Designed for excellent flow capability as well as screening
capacity. Available with 1-1/2'' or 2'' PVC or stainless steel.
They are available in Aquaspade® self-jetting or non-jetting
and Speedfast® are registered trademarks of Griffin Dewatering
Suited to meet all of your bypass, sumping and dewatering needs in
sizes ranging from 4" to 16". Handles air volumes from 50
to 150 cfm and solids up to 3". Flows 500-12000 gpm. Designed
with two or three port non-clog impellers.
Available in a wide variety of models for multiple types of applications
such as bypass, wellpoints and sumping. Units are designed to provide
a quiet operation where pumping is required and noise must be kept
to a minimum.
Suited for bypass or wellpoint applications with a standard double
diaphragm priming system. Handles air volume of 70 cfm. Flow 750-5500
Pressure Jet Pumps
Standard 4" and 6" jet pumps provide you with the source
to jet your wellpoint system or other high pressure applications.
Pressure 80-350 psi.
Driven Submersible Pumps and Power Units
Available from 4" to 24" in a variety of configurations
for material handling, trash handling and axial flow applications.
Flows 300-20000 gpm.
Griffin Pump & Equipment, Inc.
5306 Clinton Drive, Houston, TX 77020
Tel: (713) 671-7000 or (866) 770-8100
Fax: (713) 671-7077