Griffin Hydraulic Driven Submersible Pumps
and Hydraulic Power Units
 
 
Submersible Pump Features
 
Models available include Trash Pumps, Axial Flow Pumps & Materials Handling Pumps
Stainless steel pumps handle caustic and leachates
Special 6” models designed to fit standard manholes
Designed to handle sludge, trash, raw sewage, clear liquid and industrial effluent
Pumps capable of up to 140 ft of head and up to 20,000 gpm

Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4” to 24” with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to 3”. Some models may also be used for high pressure applications.

Griffin’s material handling pumps are designed to fit in standard manholes for sewer bypass operations and liquids with heavy trash and solids content. Griffin’s trash pumps are good for general pumping applications such as coffer cells or pumping lakes or ponds. Griffin’s axial flow pumps are excellent for high flow situations such as river bypass or dam repairs.

 
Description
Size
Model
Solid Handling (Inches)
Max. Capacity (GPM)
Max Head (Feet)
Hydraulic Driven Submersible Material Handling Pump
4"
4MH
3
455
59
Hydraulic Driven Submersible Material Handling Pump
4"
4MHL
3
900
112
Hydraulic Driven Submersible Material Handling Pump
6"
6MH
3
1500
80
Hydraulic Driven Submersible Material Handling Pump
6"
6MHL
3
1800
119
Hydraulic Driven Submersible Material Handling Pump
6"
6T
3
990
72
Hydraulic Driven Submersible Material Handling Pump
6"
6THL
3
2000
140
Hydraulic Driven Submersible Material Handling Pump
8"
8T
3
1490
80
Hydraulic Driven Submersible Material Handling Pump
10"
10T
3
3450
94
Hydraulic Driven Submersible Material Handling Pump
12"
12T
3
5000
55
Hydraulic Driven Submersible Material Handling Pump
24"
24AX
3
20000
35
           
Other sizes and models may be available.
 
Contact Griffin Pump & Equipment by phone at 1-866-770-8100 or e-mail us at gpe@griffinpump.com for more information and options available.
 
 
 
Submersible pump used on a bridge piling job to circulate drilling mud and evacuate the hole.
 
Print Griffin Literature:
Hydraulic Drive Submersible Pump Systems
 
 
Hydraulic Power Units
 
 
Hydraulic Power Unit Features
 
Available in 5 standard Series
Self-contained, portable diesel-driven hydraulic power units
Capable of powering hydraulic submersible pumps or other hydraulic equipment
No need for electricity in remote areas
Operates efficiently at a wide range of conditions
Trailer mounted with fuel tank and diesel engines

Griffin’s Hydraulic Power Units are available in five standard sizes; 250 Series, 400 Series, 600 Series, 800 Series and 825 Series. These units are self contained, portable, diesel-driven or electric-driven hydraulic power units. These units are capable of powering hydraulic submersible pumps or other hydraulic equipment.

Due to the ability to throttle the engine, a wide variety of hydraulic flow and pressure can be delivered. These Griffin units operate efficiently at a wide range of conditions. They can be positioned in remote locations without the need for electrical power and at distances of 150 feet or greater away from the pumphead itself.

Also, through the use of biodegradable hydraulic oils, these units are an environmentally friendly solution. Each unit is also equipped with a hydraulic relief valve to insure safe operation.

 
Description
Model
Rated Hydraulic Flow
(@1200 rpm, 100psi)
(GPM)
Standard Pumphead
Hydraulic Power Unit
Unit 250
250HPND
7
4MH, 6T
Hydraulic Power Unit
Unit 400
400HPND
28
4MHL, 6MH, 6THL, 8T
Hydraulic Power Unit
Unit 600
600HPND
38
6MHL, 10T
Hydraulic Power Unit
Unit 800
800HPND
50
6MHL, 12T
Hydraulic Power Unit
Unit 825
825HPND
60
12T, 24AX
 
Other sizes and models may be available.
 
Contact Griffin Pump & Equipment by phone at 1-866-770-8100 or e-mail us at gpe@griffinpump.com for more information and options available.
 
 
 
  Hydraulic power units and variable-use vacuum-assisted non clog pumps being used on a bypass project in Phoenix, Arizona.

Griffin Farwest was contacted to provide pumps and backup for what was believed to be peak flow. As it later turned out peak flow was miscalculated by the customer and it was necessary to increase the number of pumping units. Griffin added additional pumps to handle the flow without disrupting the project. When unforeseen circumstances arise Griffin does what is needed to get the job done.

     
Print Griffin Literature:
Hydraulic Power Units
   
 
 
Griffin Dewatering / Griffin Pump & Equipment / Griffin Remediation / Locations / Literature / Newsletter / Services / About Us
Request For Quote / Wellpoint System / Eductor System / Deep Well System / Wellpoint Pumps / Non-Clog Pumps / Jet Pumps
Silent Pac Pumps / Griffin Generators / Electric Submersible / Pumps Hydraulic / Wellpoints and Accessories / Trash Pumps / Storage Tanks
Key Personnel / Press and Awards / Griffin Careers / Career Opportunities
 

Copyright © 2013 Griffin Pump & Equipment, Inc. All rights reserved.